Furnace repairs are never fun, but they are unavoidable if you’ve had a furnace for years. Whether it be the draft inducer motor, gas valve, or flame sensor, each part of a furnace is prone to problems. So, what is the average furnace repair cost in NJ?

You can expect to spend between $120 and $300 for most furnace repairs in NJ. However, parts like the draft inducer motor can cost up to $700 to repair. Simple repairs like filter replacements cost as little as $50 to fix. You can save a fortune on furnace repairs if you schedule yearly maintenance checks.

Yearly maintenance checks can reveal lingering problems that you didn’t know existed. This can prevent HVAC emergencies that cost thousands of dollars to repair. Follow along as we explore what you can expect for your furnace repair cost in NJ.

How Much Does it Cost to Repair a Furnace in New Jersey?

Furnace repairs typically cost between $120 and $300 in New Jersey. However, the cost to repair your furnace in NJ ultimately depends on the part.

Control Board

On the low end, it costs $300 to $650 to repair a furnace control board. However, it costs up to $2,000 to replace and rewire the control board on the high end. Without a working control board, nothing will activate the ignition, gas valves, and blower motor to run.

Pilot Light

It typically costs $75 to $200 to repair a furnace pilot light. That said, you can expect to spend under $100 if your pilot light simply went out. In that case, an HVAC technician must simply light it and make sure it stays running.

Ignitor

While you can repair a furnace ignitor, it’s often best to replace it in many cases. It costs $300 to $430 to replace a furnace ignitor in New Jersey. This is necessary as the ignitor is needed to ignite the fuel and heat your home.

Dirty Filter

It costs an average of $50 to replace a dirty furnace filter if you hire professional help. You can avoid this furnace repair cost if you regularly change your filters every 90 days. Simply keep a few extra air filters at home so you can replace them as needed.

Damaged Heat Exchanger

It costs up to $2,000 to repair a damaged heat exchanger, depending on the severity. However, it’s a much better idea to replace your heat exchanger altogether, especially if it’s cracked. A cracked heat exchanger can fill your home with carbon monoxide, which can be deadly.

Gas Valve

You can expect to spend between $200 and $750 to replace a furnace gas valve. That’s because you must replace the part altogether in most cases. Gas valves control and deliver gas within a furnace to ensure it heats your home properly.

Flame Sensor

It costs an average of $200 to repair your furnace’s flame sensor. On the high end, this repair rarely costs more than $250. Without a healthy flame sensor, your furnace’s gas valve won’t work correctly. It’s dangerous to neglect a damaged flame sensor as it is a fire hazard.

Draft Inducer Motor

On average, it costs $350 to repair a draft inducer motor. A furnace draft inducer motor is necessary to stop carbon monoxide from accumulating within your HVAC system and home. Replacing the part costs as much as $700 depending on the brand and labor.

Blower Motor

The average cost to repair a blower motor is $450. However, you could spend as little as $120-$200 on repairs if the blower motor is simply dirty and full of debris. The cost becomes higher if you must replace the part, which costs up to $2,000.

Combustion Chamber

The combustion chamber is where heat is created within a furnace, and it costs up to $600 to repair. On the low end, you can expect to spend $100-$200 to repair your combustion chamber. Furnaces typically have one or two combustion chambers, so you may have a problem with both of them.

Thermostat

Many furnace problems have nothing to do with the furnace itself, but instead, it’s the thermostat. That’s because a faulty thermostat cannot properly communicate with your furnace and air conditioner. Luckily, it only costs an average of $200 to repair a thermostat, but it can cost only $100 in some cases. Replacing a thermostat is cheap as well and rarely costs more than $300.

Save Money on Furnace Repairs With Preventative Maintenance

Preventative maintenance is the only way to avoid expensive furnace repairs. Ideally, you should schedule yearly furnace maintenance. That way, HVAC technicians can clean and inspect your furnace for problems and signs of corrosion.

You can expect to spend between $75 and $200 for a standard furnace maintenance check. This is much lower than the cost of unexpected repairs and replacements. For example, a maintenance check can reveal corroded igniters and burners long before they fail.

In that case, an HVAC technician can clean the parts and diagnose problems. Preventative maintenance is also the best way to ensure your furnace lasts 15 to 30 years. This is also a great way to save money on energy bills and boost your furnace’s efficiency.

Call Rich’s Heating and Cooling LLC for Dependable Furnace Repairs

At Rich’s Heating and Cooling LLC, we prioritize HVAC longevity. We achieve this through thorough maintenance checks and dependable repairs. Based in Middlesex County, we offer quick diagnoses and furnace repairs in Dunellen, Old Bridge, Edison, Cranbury, and beyond.

Each of our HVAC technicians has years of experience and can quickly diagnose what’s wrong with your furnace. Schedule yearly check-ups to keep your furnace in great shape and ensure it lasts for years to come. Call Rich’s Heating and Cooling LLC at (732) 433-0068 for reliable and affordable furnace repairs.